The NEOLITE ULTIMA - LED phototherapy (LED on Top and LED on Bottom phototherapy) system is a mobile, free standing unit that utilizes LED to deliver high intensity phototherapy for effective treatment of Neonatal Jaundice.
The standard LED model is protected from free fall and uniformity of light is maintained (both Top and Bottom Phototherapy).
LED Spectrum range : 450 - 470 nm and peak at 458nm for optimal treatment of jaundice ( 100,000 hours of lamp life).
The intensity on baby at 35microW/Cm2 from a distance of 40cms for at an area of 700cm2 .
UV does not exceed 10-4microW/Cm2 in 180-400mm.
Optional Integral timer : Total usage hours and treatment duration / patient.
Green indicator light provided to indicate the equipment is ready for normal use.
Unit is capable of adjusting intensity.
Interruption and a restoration of the power supply preset values will remain.
Timer controller has cumulative hour meter to know the unit / LED life usage hour.
Stand type phototherapy has adjustable height-conveniently allows you to control irradiance levels on the neonate and different types of cradle. The LED Panel height adjustable from 110cm to 160cm with indication of height for every 100mm.
It has a observation light of LED Type-2 nos.
The unit has a bypass circuit (Switch) to cater to emergency situations to turn on the unit directly.
The panel is a tiltable to have that maximum manoeuverability and to align properly on baby.
It will not topple on 10 degree to 30 degree inclined angle.
The LEDs is covered by UV protective lens and counter locked preventing free fall.
The device has a fan free natural cooling technology with noise level less than 25dB.
The Top and Bottom Phototherapy is interchangable and also compatible for baby incubator and baby warmer.
Light unit tilting facility and height adjustment facility.
It has intuitive method to indicate thelight surface is at the appropriate treatment distance.
The device has a temperature protection and unit turns off when the relative temperature on baby bed reached 40 degrees and the controller to have option for setting desired temperature to suit the ambient temperature.
Bassinet / Baby tray made of polycarbonate material.
Baby bed withstand upto 10kg weight and provision for baby name identification tag/ label.
Baby bassinet : side walls are made of medical grade Acrylic material (sheets thickness of 6mm) is mounted using knob holders and Side walls can be collapsed using knobs at the sides.
Baby tray is tiltable at 8° on either side.
Bottom unit is water proof and leak proof.
All surfaces made of corrosion resistant materials.
Complete unit to be easily washable and sterilizable using both alcohol and chlorine agents.
Made of : Epoxy Powder coated steel and rust free.
Colour : Combination of 7035 (white) and DA gray (gray)
Protection : Safety earthing at 2 places & over temp. safety cut off.
Stand Type Phototherapy : Wide base for rigidity with 2 inch 4 wheels to move the unit (2 with break & 2 without break)
Baby Bassinet : Wide base for rigidity with 3 inch 4 wheels to move the unit (2 with break & 2 without break).
Operating Voltage : 200 - 240 VAC, 50Hz, ± 10%.
Power Consumption : 75W
Power cord : 3mtrs, 6A
Supply Current : 1A
Fuses : 500mA - (Live -2nos , Spare-2 Nos).
Environmental Conditions : Temp.- 10 to 40 degree C, Humidity - 15 to 90%.
Variation in intensity over : 5-6 hours <10% (min. to max.)
Irradiance ratio : >40% on mattress.
Dimensions : 160cm (H) x 70cm(W) x50cm (L)
Weight : 20 kg
