Infant Radian Warmer is a standard system for the care of newborn infants. The warmer is designed for the safety and comfort of the newborn.
All materials utilized are non-toxic and non-corrosive. The warmer ensures a hygienic environment while maintenance is minimized.
A baby warmer provides a controlled environment for newborns needing special care, such as those born prematurely.
By placing an infant in an warmer, doctors and nurses can set and monitor different aspects of the child's environment in order to create ideal conditions for survival.
Radiant warmer is an electrically powered device with radiant heating source intended to maintain the thermal balance of an infant electromagnetic spectrum.
The Controller is based on Micro Computerized system with Servo & Manual mode operation.
Three display Temperature Controller with Both manual and automatic modes with display of skin set & actual temperature & heater power.
Green indicator is provided to indicate the warmer is ready for normal use.
Large bright LED display (1 inch for display Skin Temperature & 0.5 inch display for Set temperature) are easy to monitor and for viewing from a distance and comprehensive alarms.
Control panel : Liquid proof, easy to clean (hygienic disinfection).
LED Digital display system provided to measure the actual (Skin) and set temperatures in degree C / F.
Feature touch keys provided for easy operation and facility to lock the keys to avoid unwanted user modification of the set temperature.
Desired temperature range : 15 degree C to 40 degree C.
Set temperature range : 32 degree C to 38 degree C (Servo mode).
Temperature Sensor : Thermistor based (10mm diamter with 3mm thick to fix the probe firmly on infant. Pobe is insulated on one side have well conducting rusting (Stainless steel) and non reacting metallic surfaceon the other side ( Probe wire and attachment site of the probe is pliable, thin, soft and non stiff). Easy to clean, replace and calibration free temperature sensors.
Bar graph LED system provided to indicate the heater output.
The heater is automatically cut off at 39 degree Celsius irrespective of the set parameters with audiovisual alarm.
Heater Cuts off automatically when heater box temperature >85 degrees.
If there is a >60% heater output for 10minutes it will cut off with alarm.
In servo mode if the probe is dislocated from baby and if there is no rise in baby temperature more than 1°C with in 5 minutes audiovisual alarm will be activated.
Manual mode : Heater output adjust 10 - 10% with 10% increment with audiovisual alarm for every 15mints. Heater will cut off if the maximum irradiance at any point of the mattress area exceeds a total irradiance level of 10mW/cm² (between 10 to 20 mints).
Time out alarm : Manual mode automatic reduction of heater output at 10minutes.
The Controller has memory back up to retrieve set data against power failure.
Alarm facility for patient temperature less than or greater than the required temperature (above or below the set range).
Ceramic heater placed in a parabolic aluminum reflector, and Its installed on heater box made of light weight FRP material with heater guard and temperature at heater guard <45°C in normal use.
Heater box at 60° angle adjustment possible and the heat source is provided heater guard to prevent infant in case breakage of tubes/bulbs. Its made of corrosion resistant material.
Heater dissipation : Exhaust fan provided to maintain 36.6°C temp. so that effect of UV light is not disturbed.
LED Observation lamp of 1000lux (color temp.:3700K to 5100K) with ON/OFF switch.
Battery backup for power failure with audiovisual alarm.
The controller is watch dog signal based.
SMPS based system, it will work without voltage stabilizer and with stand voltage fluctuations up to 270.VAC.
Transformer : Overheat protected in the event of short circuit and overload of output winding.
Inbuilt 5amps /15amps electrical socket -2 no’s.
Heater rotatable at 90 degrees to enable X Ray procedures.
It has a integrated tiltable baby bed system with cassette tray compatible for taking X-ray.
Marking on baby basinet and X-ray cassette to enable the proper position of the baby while doing X-ray.
X-ray cassette tray : 750x350mm and adopt up to 20mm thick cassette.
Unit has withdrawable bed with head raising facility on both end.
Bassinet angle turns : ±12° to allow for procedure.
Base plate & side walls made of medical grade Polycarbonate Acrylic material (sheets thickness of 6mm, height 220mm) is mounted using knob holders and Side walls can be collapsed using knobs at the sides.
Side wall contains with 2 cable management tubing port with edges covered with silicon rings.
Tray can be tiltable at 12° and comes with 25 density biocompatible foam mattress.
Baby bed is crevice free for easy of cleaning, infection control.
Due to sturdy base and structure of the device will not overbalance when placed in any transport position of normal use on 10° inclined plane from the horizontal plane.
Provision for 3 infusion pump / syringe pump mount and one table top monitor mount on railing system with load of 20kg.
IV Pole : Built-in SS 304 IV drip pole with height adjustable to 6ft from the ground level.
Monitor tray : 305x254mm, 270 deg swivel mounted at warmer display level.
Inbuilt SS sanitizer stand to support 500ml bottle.
Unit made as per electrical safety standard and it will work without stabilizer (with stand voltage fluctuation 200 to 270VAC).
Complete unit can easily cleanable and sterilized using both alcohol and chlorine agents.
Probe failure
1° C High and Low temperature high
High temperature cut-off
Heater failure
System failure
Power failure
Made of : Powder coated Mild steel with epoxy powder coated and rust free.
Colour : Combination of 7035 (white) and DA gray (gray)
Wheels : Sturdy Four numbers of 4 inch wheels to move the unit (2 with break and 2 without break).
Heater to baby bed distance : 90 cm adjustable by ±15cms.
Baby bed to floor distance : 90cm.
Mattress : 50 x 70cm with density of : 25kg / cmᶾ with biocompatible material.
Heater : 650W Ceramic, 200 - 240 VAC, 50Hz. (Contains parabolic aluminum reflector above the heater to maximise the heater output).
Temp. Sensor : Thermistor based with Thermal reflector to fixe on skin probe on baby. Resolution 0.1°C, Accuracy : ±0.2°C
Temperature on the baby mattress : <43°C when warmer is operating under steady temperature controller.
Temperature difference on mattress : <2°C.
Controller : SMPS based Micro Computerized controller with over heating / over load protection.
Audio alarm : 50dBA volume controller, 65dBA at 3mts from warmer (<80dBA on mattress).
LED Display : 7 segment LED Display Temp. 1 inch display Set Temp. 0.5 inch display
Operating Voltage : 200 - 240 VAC, 50Hz.
Power Consumption : 750W
Power cord : 3m, 6A
Supply Current : 4A
Fuses : 6 A - 2 Nos
Protection : Safety earthing at 2 places, OVP, earth leakage protection.
Patient leakage current : 100µA.
Dimension : 90(W) x 110(L) x 200(H) cm
Weight : 65kg.
Operating Environment : Ambient temp. : 0°C - 50°C, Humidity : 15°C - 90°C Air Velocity : < 0.3m/s.
IEC 60601-1-1, IEC 60601-1-2
ISO 9000:2015,
ISO 13485: 2016
ISO 10993:2009,
CE
